Mod-eez Anti-rotation Clips – 5070 Series for 3/4″+ Stock

Mod-eez Anti-rotation Clips – 5070 Series for 3/4″+ Stock

$26.10$348.00

Mod-eez®️ Anti-Rotation Clips are specifically designed for RTA furniture and case goods. They are made of spring steel and come in two widths for 1/2″ and 3/4″ + material. By utilizing two spring steel clips, one male, and one female, the connectors simply slide into one another, preventing the joint from rotating. Mod-eez®️ Anti-Rotation clips work especially well in areas where only one clip can be used, such as a table apron as little as 2″ tall.

→ Order a Sample Pack

Description

Mod-eez®️ Anti-Rotation Cabinet Connectors

The Mod-eez®️ system was developed to join panels securely together in a fast and simple method with no visibility of the connector. The Mod-eez®️ Anti-Rotation Clips meets the objective by utilizing two spring steel clips, one male, and one female which slide into each other preventing the joint from rotating. Mod-eez®️ Anti-Rotation clips work especially well in areas where only one clip can be used, such as a table apron as little as 2″ tall. Spring steel makes the joint strong, yet flexible, and with the clip located in its pocket and the system assembled, all fasteners disappear.

Mod-eez®️ comes in Single ClipsDouble Clips, and Anti-Rotation Clips. The Mod-eez®️ Anti-Rotation Clips comes in two widths, working with both 1/2″ and 3/4″ + material.

Features and Benefits:
  • Fast assembly
    • Efficient and very good to use in production line manufacturing.
    • Components are simply hooked together in seconds
    • Reduces labor and equipment cost
    • Efficient: High degree of pre-manufacturing.
    • Components can be transported and simply assembled on site.
  • Non-visible connector
    • Appeals to the architect and customer
    • Concealed
  • Self-tightening
    • The clips can be disassembled and reassembled
  • Versatile
    • Used with all solid and wood-based materials and plastic as well as steel and aluminum.
    • 2 types of clips are available for 1/2″ and 3/4″ + stock
    • Can be used with material height as little as 2″ without rotation
  • Durable and Strong
    • Spring steel sturdy design
    • Longer PH-screws (approx. 5 x 60), can significantly increase the strength of the connector.
Tips:
  • Perfect for industrial manufacturing with CNC
  • Prevents rotation in furniture parts where the height of the part is as small as 50 mm
  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • For handheld routers, use our Mod-eez®️ Drilling and Depth Jig for a perfect installation every time.
  • Used with all wood and board materials
Applications:
  • Case Goods
  • Cabinets
  • Table aprons
  • Chairs
  • Furniture
  • Interior design
  • Shop fittings
Material

Spring steel

Coating

None

Mounting

With PH- or CS-screws Ø = 4,5 mm (length as required).

Advantages

Concealed, self-tightening connector for 32 mm system, demountable, for timber and steel.

Installation

Spindle moulder, plunge router, CNC equipment.

Suitable materials:

For all solid wood, wood-based panels and plastic materials from 16 mm thickness up.

Application

Case goods, shop fittings, furniture

Accessories

Drill- and depth-jig | Art.-No. CCD/2070

Additional information

Type

Male & Female Pass-Thru Anti-Rotation Clips (5071/5072), Male & Female Locking Anti-Rotation Clips (5075/5074), Male & Female Anti-Rotation Clips (5075/5076)

Applications

Videos

Installation

(View and Download Instruction Manual)

Steps:

  1. Route the pocket for Mod-eez®️ female clip connector according to chart below
  2. Use the Mod-eez®️ Drilling and Depth Jig to pre-drill (5/32″ or 4 mm) holes 32 mm on center. This Jig will also ensure that the pocket is drilled to the perfect depth for all Mod-eez®️ single clip, double clip, and anti-rotation connectors.
  3. Attach female connector in the routed pocket and the male connector on the surface of workpiece using PH-Screws Ø 4,5 mm.
  4. Assemble workpiece with a rubber mallet.

Tips:

  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
Mod-eez®️ (for 3/4″ stock)
5075, 5076
Routing depth
12 mm / 0.475″
Routing length
≥ 42 mm / 1.674″
Routing width
13,5 mm / 0.525″
Panel thickness
19 mm / 3/4″
Hole-line A
32 mm / 1-1/4″

Reviews

There are no reviews yet.

Be the first to review “Mod-eez Anti-rotation Clips – 5070 Series for 3/4″+ Stock”

You may also like…

  • Select options Details
  • Select options Details
  • Mod-eez®️ System Sets

    $52.25$1,228.00
    Select options Details
  • Select options Details

Title