Name: Mod-eez Anti-rotation Mounting Screws
SKU: 118310
Price: 3.00 USD
Availability: InStock

Mod-eez Anti-rotation Mounting Screws

$3.00 – $120.00

The Mod-eez®️ Anti-rotation Mounting Screws are specifically designed for an optimal insertion of the Male Anti-rotation Clip into the the Female Anti-rotation Clip which is due to the screws being a #10 but with the #8 head it allows for swift engagements of the parts.

Mod-eez® Sets are also available, which include the Clip, Shoulder head screw, and mounting screws.

→ Order a Sample Pack

Mounting Screw Type

Pack Size

Clear selection

SKU: N/A Categories: Cabinet Connectors, Cabinets, Shelvings & Fixtures, Case Good Connectors, Furniture Connectors, Millwork Furniture, Mod-eez Connectors, Mod-eez Mounting Screws, Mod-eez Mounting Screws 1, Shop Fittings, Standard Stock Case Goods Tag: Mod-eez Mounting Screws

Additional information

Mounting Screw Type	CS-Screw 5/8" Anti-Rotation Mounting Screw (757), CS-Screw 1 1/8" Anti-Rotation Mounting Screw (758)
Pack Size	25, 100, 250, 1000, 2500

Applications

: Cabinet Built with Mod-eez System

Video

Installation

(View and Download Instruction Manual)

Steps:

Route pocket in Mod-eez®️ Clip according to chart below.
Use the Mod-eez®️ Drilling and Depth Jig to pre-drill (5/32″ or 4 mm) holes 32 mm on center. This Jig will also ensure that the pocket is drilled to the perfect depth for all Mod-eez®️ single clip, double clip, and anti-rotation connectors.
Mount clip with PH-Screws Ø = 4,5 mm (length as required)
Pre-drill hole for Shoulder Screw and install
Assemble workpiece with a rubber mallet

Tips:

Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
To prevent engaged members from rotating (without anti-rotation clips) attach the shoulder screw in the pocket and the clip on the surface.

Mod-eez Anti-rotation Mounting Screws