Mod-eez Single Clip – 6060 Series for 1″+ Stock

Mod-eez Single Clip – 6060 Series for 1″+ Stock

$15.97$213.00

Mod-eez®️ Clip Connectors are specifically designed for RTA furniture and case goods. They are made of spring steel and come in two widths for 5/8″+ and 3/4″+ material and are used in combination with a Shoulder Screw which can be attached in all wood materials including metal. From pass-thru, non-locking, semi-locking, and locking clips, you will be sure to find the right combination. This product contains the Mod-eez®️ Clip Only.

Mod-eez® Sets are also available, which include the Clip, Shoulder head screw, and mounting screws.

→ Order a Sample Pack

Description

Mod-eez®️ Single Clip Connectors

The Mod-eez®️ system was developed to join panels securely together in a fast and simple method with no visibility of the connector. The Mod-eez®️ Fastening System meets the objective by utilizing a spring steel declining ramp “clip” and a large collared Shoulder Screw at the two mating members. Spring steel makes the joint strong, yet flexible, while the collar on the Shoulder Screw adds tremendous resistance to torsional pull-out. Assembly occurs by simply sliding the Shoulder Screw head down the clips ramp. With the clip located in its pocket, and the system assembled, all fasteners disappear.

Mod-eez®️ come in Single Clips, Double Clips, and Anti-Rotation Clips and with each, there are 4 types available: Pass-thru, non-locking (easy to disassemble), semi-locking (hard to disassemble), and locking (cannot be disassembled). Mod-eez®️ comes in two widths, working with both 5/8″ and 3/4″ + material.

Mod-eez Sets are also available, which include the Clip, Shoulder head screw, and mounting screws.

Features and Benefits:
  • Fast assembly
    • Efficient and very good to use in production line manufacturing.
    • Components are simply hooked together in seconds
    • Reduces labor and equipment cost
    • Efficient: High degree of pre-manufacturing.
    • Components can be transported and simply assembled on site.
  • Non-visible connector
    • Appeals to the architect and customer
    • Concealed
  • Self-tightening
    • The pass-thru, non-locking and semi-locking clips can be disassembled and reassembled
  • Versatile
    • For materials from 16 mm thickness and up.
    • Used with all solid and wood-based materials and plastic as well as steel and aluminum.
    • 4 types of clips: Pass-thru, non-locking, semi-locking, and locking.
  • Durable and Strong
    • Spring steel sturdy design
    • Longer PH-screws (approx. 5 x 60), can significantly increase the strength of the connector.
Tips:
  • Perfect for industrial manufacturing with CNC
  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
  • To prevent engaged members from rotating (without anti-rotation clips) attach the Shoulder Screw in the pocket and the clip on the surface.
  • For handheld routers, use our Mod-eez®️ Drilling and Depth Jig for a perfect installation every time.
  • Used with all wood and board materials
Applications:
  • Case Goods
  • Cabinets
  • Chairs
  • Furniture
  • Interior design
  • Shop fittings
Material

Spring steel

Coating

None

Mounting

With PH- or CS-screws Ø = 4,5 mm (length as required).

Advantages

Concealed, self-tightening connector for 32 mm system, demountable, for timber and steel.

Installation

Spindle moulder, plunge router, CNC equipment.

Suitable materials:

For all solid wood, wood-based panels and plastic materials from 16 mm thickness up.

Application

Case goods, shop fittings, furniture

Accessories

Drill- and depth-jig | Art.-No. CCD/4030S
Mod-eez®️ Shoulder Head Screws

Additional information

Connector Type

Non-Locking Clip (6063), Locking Clip (6064)

Pack Size

25, 50, 100, 250, 1,000

Applications

Videos

Installation

(View and Download Instruction Manual)

Steps:

  1. Route pocket in Mod-eez®️ Clip according to chart below.
  2. Use the Mod-eez®️ Drilling and Depth Jig to pre-drill (5/32″ or 4 mm) holes 32 mm on center. This Jig will also ensure that the pocket is drilled to the perfect depth for all Mod-eez®️ single clip, double clip, and anti-rotation connectors.
  3. Mount clip with PH-Screws Ø = 4,5 mm (length as required)
  4. Pre-drill hole for Shoulder Screw and install
  5. Assemble workpiece with a rubber mallet

Tips:

  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
  • To prevent engaged members from rotating (without anti-rotation clips) attach the shoulder screw in the pocket and the clip on the surface.

Title