Mod-eez®️ System Sets

Mod-eez®️ System Sets

$52.25$1,228.00

Mod-eez®️ System is specifically designed with RTA furniture, case goods and cabinetry in mind. Mod-eez®️ Clips are made of spring steel for extreme durability, working for both 5/8″ and 3/4″ + material. Drilling Jigs and Depth Gauges are available for easy installation.

Mounting screws and Shoulder Head Screws are included and can be attached in all wood materials.

→ Order a Sample Pack

Description

Mod-eez®️ System Sets

Mod-eez System sets are specifically designed with RTA furniture, case goods and cabinetry in mind. This innovative system was developed to join panels securely together in a fast and simple method with no visibility of the connector. The Mod-eez®️ Fastening System meets the objective by utilizing a spring steel declining ramp “clip” and a large collared Shoulder Screw at the two mating members. Spring steel makes the joint strong, yet flexible, while the collar on the Shoulder Screw adds tremendous resistance to torsional pull-out. Assembly occurs by simply sliding the Shoulder Screw head down the clips ramp. With the clip located in its pocket, and the system assembled, all fasteners disappear.

Mod-eez®️ Sets include mounting screws and shoulder head screw for assembly. With each set, you can choose between a Pass-thru Clip (shoulder head passes through the clip) or a Non-locking Clip (easy to disassemble). Mod-eez®️ Sets comes in one width, working with both 5/8″ and 3/4″ + material. Mod-eez®️ Clips are also available in Single Clips, Double Clips, and Anti-Rotation Clips. Drilling Jigs and Depth Gauges are available for easy installation.

Features and Benefits:
  • Fast assembly
    • Efficient and very good to use in production line manufacturing.
    • Components are simply hooked together in seconds
    • Reduces labor and equipment cost
    • Efficient: High degree of pre-manufacturing.
    • Components can be transported and simply assembled on site.
  • Non-visible connector
    • Appeals to the architect and customer
    • Concealed
  • Self-tightening
    • The pass-thru, non-locking and semi-locking clips can be disassembled and reassembled
  • Versatile
    • For materials from 16 mm thickness and up.
    • Used with all solid and wood-based materials and plastic as well as steel and aluminum.
    • 4 types of clips: Pass-thru, non-locking, semi-locking, and locking.
  • Durable and Strong
    • Spring steel sturdy design
    • Longer PH-screws (approx. 5 x 60), can significantly increase the strength of the connector.
Tips:
  • Perfect for industrial manufacturing with CNC
  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
  • To prevent engaged members from rotating (without anti-rotation clips) attach the Shoulder Screw in the pocket and the clip on the surface.
  • For handheld routers, use our Mod-eez®️ Drilling Jig and Depth Gauge for a perfect installation every time.
  • Used with all wood and board materials
Applications:
  • Case Goods
  • Cabinets
  • Chairs
  • Furniture
  • Interior design
  • Shopfitting

Say goodbye to visible screws and say hello to fast assembly with this innovative system. Made with spring steel for superior durability, these sets come with mounting screws and shoulder head screws for easy assembly.

For versatility, choose between pass-thru or non-locking clips. With a non-visible connector and self-tightening design, Mod-eez System sets are perfect for industrial manufacturing and interior design. With this set, you can customize your connectors to fit all wood and board materials.

Product Pictures

Applications

Videos

Installation

(View and Download Instruction Manual)

Steps:

  1. Route pocket in Mod-eez®️ Clip according to chart below.
  2. Use the Mod-eez®️ Drilling and Depth Jig to pre-drill (5/32″ or 4 mm) holes 32 mm on center. This Jig will also ensure that the pocket is drilled to the perfect depth for all Mod-eez®️ single clip, double clip, and anti-rotation connectors.
  3. Mount clip with PH-Screws Ø = 4,5 mm (length as required)
  4. Pre-drill hole for Shoulder Screw and install
  5. Assemble workpiece with a rubber mallet

Tips:

  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
  • To prevent engaged members from rotating (without anti-rotation clips) attach the shoulder screw in the pocket and the clip on the surface.
Mod-eez®️ (for 5/8″ stock)
4031, 4032, 4034, 4035
Routing depth T
11 mm / 0.438″
Routing length L
≥ 42 mm / 1.674″
Routing width B
11 mm / 0.430″ / 7/16″
Center distance Z
11 mm / 0.438″
Panel thickness from
16 mm / 5/8″
Hole-line A
32 mm / 1-1/4″
Mod-eez®️ (for 3/4″ stock)
5030, 5032, 5032A (available upon request only)
Routing depth T
11 mm / 0.438″
Routing length L
≥ 42 mm / 1.674″ / 1-11/16″
Routing width B
13,5 mm / 0.525″ / 1/2″
Center distance Z
11 mm / 0.438″
Panel thickness from
19 mm / 3/4″
Hole-line A
32 mm / 1-1/4″

Reviews

There are no reviews yet.

Be the first to review “Mod-eez®️ System Sets”

You may also like…

  • Select options Details
  • Select options Details
  • Select options Details
  • Select options Details

Title