The METAL biscuit is a #20 self-tightening, non-visible zinc die-casting slide-in connector with integrated locking tabs and is suitable for load-bearing joints for panels and boards. The connector halves are inserted and screwed into the biscuit slot with pan-head screws. Simply slide the connector halves into each other to carry out the assembly.
METAL – Biscuit Connector
$95.56 – $347.50
Description
METAL – Biscuit Connector
The METAL biscuit is a #20 self-tightening, non-visible zinc die-casting slide-in connector with integrated locking tabs and is suitable for load-bearing joints for panels and boards. The connector halves are inserted and screwed into the biscuit slot with 3×13 mm and 3×25 mm pan-head screws (PH screws). Simply slide the connector halves into each other to carry out the assembly. If needed, it can be reinforced by adding drops of KNAPP®-Adhesive PU+ (Z011/1) when installing the connector halves. The METAL biscuit connector is a very strong and immediately load-bearing, putting NO halt on the manufacturing process. If used for knock-down cabinets or furniture. The workpiece can be installed very fast on-site, thus allows the parts to be transported flat-packed. Optionally, the connector can be latched via locking tabs in one or both directions.
Features and Benefits:
- Fast assembly
- Components simply slide and join together in seconds.
- Reduces labor and equipment cost
- Non-visible connector
- Appeals to the architect and customer
- Self-tightening
- no need to clamp the workpiece during assembly
- prevents forming of gaps in the joint over time
- Solid
- Very strong connector and especially popular to use for furniture and cabinets made of hardwood.
Tips:
- Works great for knock-down furniture
- Especially useful for miter joints
- Joint can be latched via the locking tabs on the connector
- Used with all wood and board materials
- Recommended glue for a permanent joint → KNAPP®-Adhesive PU+ (Z011/1) or to install with the connector for reinforcement
Applications:
- Case Goods
- Architectural Millwork
- Shopfitting
- Furniture
Material
Alloy-diecast
Coating
none
Connector type
Slide connector
Mounting
Screw-in with included PH-screws 3×13 mm (face grain), 3×25 mm (end grain)
Advantages
Concealed, self-tightening, demountable connector with optional integrated stop
Installation
Cutting a slot with a biscuit joiner #20 slot) and adjust the depth of the slot to 12.5 mm by using the micro-adjustment screw. Insert the connector into the pre-cut slot and screw it in.
Suitable materials
All wood and board materials
Application
Furniture, architectural millwork, shopfitting, door frames
Applications
Videos
You must be logged in to post a review.
Reviews
There are no reviews yet.