ROUTING JIGS for GIGANT®, RICON® and DUO-System

$67.60

The custom MULTI F Routing Jigs are specifically designed to perfectly align and route the mortise or rebate for the GIGANTRICON, and DUO-System. We recommend combining the routing jig with a → 2 Flute Straight Router Bit 13/32″ and a —> Router Bushing 1″ OD to make the mortise. Optionally, → Router Base Plate Adapter that holds the Router Bushing 1″ OD. Please choose your size depending on the size of the connector WIDTH. I.e. If you order the DUO 62/15 you would choose the MULTI F15 Routing Jig.

→ Router Bushing 1″ OD
→ 2 Flute Straight Router Bit 13/32″
→ Router Base Plate Adapter

SKU: N/A Category:

Description

The custom MULTI F Routing Jigs are specifically designed to perfectly align and route the mortise or rebate for the GIGANTRICON, and DUO-System. We recommend combining the routing jig with a → 2 Flute Straight Router Bit 13/32″ and a —> Router Bushing 1″ OD to make the mortise. Optionally, → Router Base Plate Adapter that holds the Router Bushing 1″ OD. Please choose your size depending on the size of the connector WIDTH. I.e. If you order the DUO 62/15 you would choose the MULTI F15 Routing Jig.

Please choose your size depending on the size of the connector width.

MULTI F15 → for DUO 46/15, DUO 62/15, DUO 100/15, RICON 66/16
MULTI F20 → for DUO 90/20 and RICON 70/20
MULTI F30 → for DUO 46/30, DUO 62/30 and RICON 60/30, 80/30, 100/30, 120/30, 140/30, 160/30
MULTI F40 → for RICON 60/40, 80/40, 100/40, 120/40, 140/40, 160/40 and GIGANT 120/40, 150/40, 180/40
MULTI F46 → for DUO 90/46

 

Additional information

Size

MULTI F15, MULTI F20, MULTI F30, MULTI F40, MULTI F46

Videos

Installation

Steps:

  1. Cut the mortise by means of a → 2 Flute Straight Router Bit 13/32″ to be combined with —> Router Bushing 1″ OD and the MULTI F Routing Jigs. *Note; please pay particular attention when choosing a MULTI F Routing Jigs. The size of the Routing Jig will depend on the size of the connectors. Optionally, use the → Router Base Plate Adapter to hold the Router Bushing 1″ OD.
  2. Use the MULTI F Routing Jig to perfectly align and mortise either the end-grain or face 13 mm deep. Mortise width is preset via the Routing Jiga and mortise length depends on the size connector. Please download Instruction Manual for a particular connector size. See above or under main tab Resources → Instruction Manuals
  3. Set the one DUO-System connector plate into the mortise, using it as a jig to predrill holes.
  4. Attach one DUO-System plate with the screws provided
  5. Lay the second plate over the first and screw in the pan head screws until they are snug against the second plate. (this will set the correct depth of the pan head screws and ensure a tight fit during final installation)
  6. Install second DUO-System plate with the screws provided
  7. Attach workpiece using a rubber mallet

Tips:

  1. The joint is always tight, as the connector snaps together in a dovetail-like manner. Still, the fasteners allow the natural shrinking and swelling of the joints and are adjustable if needed.

Reviews

There are no reviews yet.

Be the first to review “ROUTING JIGS for GIGANT®, RICON® and DUO-System”

You may also like…

  • Duo System Wood Frame Connectors
    Select options Details
  • Select options Details
  • Add to cart Details
  • GIGANT® – Beam Hangers

    $121.68$812.50
    Select options Details