ZIPBOLT™ System Starter Kit

ZIPBOLT™ System Starter Kit

$69.00$99.00

The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, frame, and home furniture connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors.

→ Order larger quantity

Description

ZIPBOLT™ System Starter Kit

The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, and frame connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors and fasteners. ZIPBOLT™️ requires no additional tightening while the parts are connected. Tensioning tools often cause damage and a considerable amount of extra work – this is not necessary when using the ZIPBOLT™️. The fastener connects and holds the components in position; easy disassembly is possible at any time.

The connector consists of a threaded rod, which has a metric fine thread and ensures an optimal force transmission – combined with a force-transmitting gear drive. The mounting of the connector is very fast; it is easy to install with a cordless drill or even a hand-held screwdriver. With these tools, the processor can quickly tighten the components together. One-hand mounting is also possible. Countertops and frames from 5/8″ (16 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds.

The different variations ZIPBOLT™️ 85, 100 Mini, 120, 170 and 90 KD are specifically tailored for different dimensions and requirements in the components.

ZIPBOLT™️ 100 MINI – Components can be tightened by simply using a #4 mm or 5/32″ hex key.

ZIPBOLT™️ 85, 120, 170 – Components can be tightened simply by using a #5 mm or 3/16″ hex key.

Features and Benefits:
  • Fast and simple assembly
    • Items can be flat packed, shipped, and assembled on site
    • Easy to install with a cordless drill or hand-held screwdriver
    • Reduces labor and equipment cost
  • Demountable
    • Can be disassembled and reassembled at any time
  • Versatile
    • For board thickness from 5/8″ (16 mm) to 1-1/2″ (38 mm)
    • Used with all wood and board materials
    • Great for RTA furniture
Applications:
  • Countertops and frames
  • Beds frames
  • Tables and chairs
  • Office and home furniture
  • Staircases
Mounting

Into pre-drilled holes and grooves

Advantages

Fast and easily installed by only using a 5 mm Allen key or 5 mm hex bit in conjunction with a cordless drill

Installation

Drilling machine, plunge router, CNC equipment

Suitable materials

Solid wood, wood panels, composite materials from 16 mm to 22 mm thickness up

Application

Connector for worktops/countertops and panels

Applications

ZIPBOLT™ Variants

Beds and Countertops

Videos

ZIPBOLT™ 85

ZIPBOLT™️ 85 – Joint connector for countertop from 7/8″ (22 mm) with metal housing

The ZIPBOLT™️ 85, 120 and 170 have been designed for use in countertops. The hole should be drilled 20 mm deep with a 35 mm diameter drilled hole. This makes it suitable for countertop thickness of 25 mm to 40 mm. The breaking load of the metal housing is about 100 kg and the breaking load in pulling direction is up to 60 kg.

The ZIPBOLT™️ 85 can be tightened simply using a #5 mm or 3/16″ Hex Key.

Drilling depth M
20 mm
Length
85 mm
X
9,5 mm
Ø A
35 mm
B
33-44 mm
C
33-44 mm
Ø F
6 mm
E
8 mm

ZIPBOLT™ 90 KD

ZIPBOLT™️ 90 KD – Frame connector for frames from 7/8″ (22 mm) to 1-1/2″ (38 mm) board thickness

The ZIPBOLT™️ 90 KD has been designed as an innovative solution as a frame connector for beds, tables, staircase assembly, and home furniture. The hole should be drilled 20 mm deep with a 35 mm diameter drilled hole. The breaking load of the metal housing is about 100 kg and the breaking load in the pulling direction is up to 60 kg.

The ZIPBOLT™️ 90 KD can be tightened simply using a #5 mm or 3/16″ Hex Key.

Drilling depth M
20 mm
Length
90 mm
X
9,5 mm
Ø A
35 mm
B
60-65 mm
D
32 mm
Ø H
12 mm
Ø F
8 mm
Ø E
9 mm

ZIPBOLT™ 100 mini

ZIPBOLT™️ 100 mini – Joint connector for countertop from 5/8″ (16 mm) with metal housing

The ZIPBOLT™️ 100 MINI is our thinnest version and should be drilled 13 mm deep with a 25 mm diameter drill. It can be used from a board thickness of 16 mm to 20 mm. The breaking loads of the metal housing are also 100 kg and the breaking load in pulling direction is as well up to 60 kg.

The ZIPBOLT™️100 MINI can be tightened simply using a #4 mm or 5/32″ Hex Key.

Drilling depth M
13 mm
Length
100 mm
X
5,5 mm
Ø A
25 mm
B
42-49 mm
C
42-49 mm
Ø F
6 mm
E
10 mm

ZIPBOLT™ 120

ZIPBOLT™️ 120 – Joint connector for countertop from 7/8″ (22 mm) with metal housing

The ZIPBOLT™️ 85, 120 and 170 have been designed for use in countertops. The hole should be drilled 20 mm deep with a 35 mm diameter drilled hole. This makes it suitable for countertop thickness of 25 mm to 40 mm. The breaking load of the metal housing is about 100 kg and the breaking load in pulling direction is up to 60 kg.

The ZIPBOLT™️ 120 can be tightened simply using a #5 mm or 3/16″ Hex Key.

Drilling depth M
20 mm
Length
120 mm
X
9,5 mm
Ø A
35 mm
B
50-62 mm
C
50-62 mm
Ø F
6 mm
E
8 mm

ZIPBOLT™ 170

ZIPBOLT™️ 170 – Joint connector for countertop from 7/8″ (22 mm) with metal housing

The ZIPBOLT™️ 85, 120 and 170 have been designed for use in countertops. The hole should be drilled 20 mm deep with a 35 mm diameter drilled hole. This makes it suitable for countertop thickness of 25 mm to 40 mm. The breaking load of the metal housing is about 100 kg and the breaking load in pulling direction is up to 60 kg.

The ZIPBOLT™️ 170 can be tightened simply using a #5 mm or 3/16″ Hex Key.

Drilling depth M
20 mm
Length
170 mm
X
9,5 mm
Ø A
35 mm
B
74-87 mm
C
74-87 mm
Ø F
6 mm
E
8 mm

Installation

(View and Download Instruction Manual)

Steps:

  1. Drill 2 boreholes according to dimensions
  2. Cut groove for threaded rod.
  3. Insert threaded rod into gear drive and attach to U shaped bracket
  4. Carry out installation by tightening gear drive using an Allen key or hex bit. For ZIPBOLT™️ 100 MINI use a #4 mm or 5/32″ hex key. For ZIPBOLT™️ 85, 120, and 170 use a #5 mm or 3/16″ hex key.

Reviews

There are no reviews yet.

Be the first to review “ZIPBOLT™ System Starter Kit”

You may also like…

  • Select options Details
  • Add to cart Details
  • Select options Details
  • DUO – Hook Connector

    $89.05$445.25
    Select options Details
  • Select options Details

Title