ZIPBOLT™ – Worktop/Countertop Connectors

$22.10$69.00

The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, frame, and home furniture connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors.

→ Order a Sample Pack

Description

ZIPBOLT™ – Worktop/Countertop Connectors

The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, and frame connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors and fasteners. ZIPBOLT™️ requires no additional tightening while the parts are connected. Tensioning tools often cause damage and a considerable amount of extra work – this is not necessary when using the ZIPBOLT™️. The fastener connects and holds the components in position; easy disassembly is possible at any time.

The connector consists of a threaded rod, which has a metric fine thread and ensures an optimal force transmission – combined with a force-transmitting gear drive. The mounting of the connector is very fast; it is easy to install with a cordless drill or even a hand-held screwdriver. With these tools, the processor can quickly tighten the components together. One-hand mounting is also possible. Countertops and frames from 5/8″ (16 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds.

Our standard ZIPBOLT™️ sizes are both 120 and 170. The 85 is a unique size and is more often used when less room is available, such as the outside angle of a 45-degree miter. This is a unique situation where the 120 or 170 may be too large. 

The different variations ZIPBOLT™️ 85, 100 Mini, 120, 170 and 90 KD are specifically tailored for different dimensions and requirements in the components.

ZIPBOLT™️ 100 MINI – Components can be tightened by simply using a #4 mm or 5/32″ hex key.

ZIPBOLT™️ 85, 120, 170 – Components can be tightened simply by using a #5 mm or 3/16″ hex key.

Features and Benefits:
  • Fast and simple assembly
    • Items can be flat packed, shipped, and assembled on site
    • Easy to install with a cordless drill or hand-held screwdriver
    • Reduces labor and equipment cost
  • Demountable
    • Can be disassembled and reassembled at any time
  • Versatile
    • For board thickness from 5/8″ (16 mm) to 1-1/2″ (38 mm)
    • Used with all wood and board materials
    • Great for RTA furniture
Applications:
  • Countertops and frames
  • Beds frames
  • Tables and chairs
  • Office and home furniture
  • Staircases

 

Mounting

Into pre-drilled holes and grooves

Advantages

Fast and easily installed by only using a 5 mm Allen key or 5 mm hex bit in conjunction with a cordless drill

Installation

Drilling machine, plunge router, CNC equipment

Suitable materials

Solid wood, wood panels, composite materials from 16 mm to 22 mm thickness up

Application

Connector for worktops/countertops and panels

Applications

ZIPBOLT™ Variants

Beds and Countertops

Videos

ZIPBOLT™ 100 mini

ZIPBOLT™️ 100 mini – Joint connector for countertop from 5/8″ (16 mm) with metal housing

The ZIPBOLT™️ 100 MINI is our thinnest version and should be drilled 13 mm deep with a 25 mm diameter drill. It can be used from a board thickness of 16 mm to 20 mm. The breaking loads of the metal housing are also 100 kg and the breaking load in pulling direction is as well up to 60 kg.

The ZIPBOLT™️100 MINI can be tightened simply using a #4 mm or 5/32″ Hex Key.