KOMBI Hook Connector Set

The KOMBI Hook Connector Set is the complete KOMBI hanging system in one package. Each set includes a KOMBI Hook Connector (aluminum-zinc die-cast biscuit), a KOMBI Mounting Bracket (stainless steel), and screws for installation. The hook connector sits in a #10 biscuit slot on the panel side, while the mounting bracket screws to the wall or substrate — creating a concealed, instantly demountable hook-on connection.

This is the easiest way to get started with the KOMBI system. One SKU gives you both halves of the connection plus the hardware to install them. For larger projects where component ratios vary, the KOMBI Hook Connector (K614) and KOMBI Mounting Bracket (K615) are also available separately.

Features and Benefits

• Complete system in one purchase — hook connector, mounting bracket, and screws included
• Concealed connection — invisible from the outside
• Demountable — panels hang on and lift off without tools
• Non-corrosive materials — aluminum-zinc die-cast hook and stainless steel bracket
• Installs in a standard #10 biscuit slot

• Wall cladding and decorative paneling
• Exhibition and trade show construction
• Shopfitting and retail displays
• Facade paneling (interior and protected exterior)
• Architectural millwork and feature walls
• Closets and case goods

• Kit Contents: 1× KOMBI Hook Connector (K614/1), 1× KOMBI Mounting Bracket (K615/1), 4× PH screws 3×25 mm (Z601/1)
• Hook Material: Aluminum-zinc die-cast
• Bracket Material: Stainless steel
• Biscuit Slot: #10
• Installation: Cut a #10 slot with a biscuit joiner at 10 mm depth setting
• Suitable Materials: All wood, board materials, and plastics
• Advantages: Complete concealed hanging system — demountable, non-corrosive

Steps

1. Set your biscuit joiner to cut a #10 slot at 10 mm depth.
2. Cut biscuit slots in the back face of the panel at the desired mounting positions.
3. Insert the KOMBI Hook Connector into each slot and screw in or glue in place.
4. Screw the KOMBI Mounting Bracket to the wall or substrate at matching positions.
5. Hang the panel by hooking it onto the mounted brackets.
6. To remove, simply lift the panel off — it can be rehung at any time.

Tips

• For production quantities, order the KOMBI Hook Connector (K614) and KOMBI Mounting Bracket (K615) separately to match your specific hook-to-bracket ratio.
• The hook connector can also be used with perforated rails instead of the mounting bracket for adjustable positioning along the rail.