Mod-eez Clip Mounting Screws

$2.50 – $120.00

Mod-eez®️ Clip Connectors are specifically designed for RTA furniture and case goods. They are made of spring steel and come in two widths for 5/8″+ and 3/4″+ material and are used in combination with a Shoulder Screw which can be attached in all wood materials including metal. From pass-thru, non-locking, semi-locking, and locking clips, you will be sure to find the right combination. This product contains the Mod-eez®️ Clip Only.

Mod-eez® Sets are also available, which include the Clip, Shoulder head screw, and mounting screws.

→ Order a Sample Pack

Mounting Screw Type

Pack Size

Clear selection

For bulk orders, please reach out to us for tailored lead times and shipping options.

SKU: N/A Categories: Cabinet Connectors, Cabinets, Shelvings & Fixtures, Case Good Connectors, Furniture Connectors, Millwork Furniture, Mod-eez Connectors, Mod-eez Mounting Screws, Mod-eez Mounting Screws 1, Shop Fittings, Standard Stock Case Goods Tag: Mod-eez Mounting Screws

Additional information

Mounting Screw Type	PH – Mod-eez Mtg. Screw #10 SMT x 1/2" (511), PH – Mod-eez Mtg. Screw #10 SMT x 5/8" (512), PH – Mod-eez Mtg. Screw – #10 SMT x 1" (513)
Pack Size	25, 50, 100, 250, 1000, 2500

Applications

: Cabinet Built with Mod-eez System

Video

Installation

(View and Download Instruction Manual)

Steps:

Route pocket in Mod-eez®️ Clip according to chart below.
Use the Mod-eez®️ Drilling and Depth Jig to pre-drill (5/32″ or 4 mm) holes 32 mm on center. This Jig will also ensure that the pocket is drilled to the perfect depth for all Mod-eez®️ single clip, double clip, and anti-rotation connectors.
Mount clip with PH-Screws Ø = 4,5 mm (length as required)
Pre-drill hole for Shoulder Screw and install
Assemble workpiece with a rubber mallet

Tips:

Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
To prevent engaged members from rotating (without anti-rotation clips) attach the shoulder screw in the pocket and the clip on the surface.