Mod-eez®️ Double Clip Connectors are specifically designed for RTA furniture and case goods. They are made of spring steel and come in two widths for 5/8″ and 3/4″ + material. Used in combination with 2 Shoulder Screws, they are anti-rotating and can be attached in all wood materials including metal. From non-locking, semi-locking, and locking clips, you will be sure to find the right combination.
Mod-eez Double Clip – 5030 Series for 3/4″+ Stock
$20.75 – $380.00
Description
Mod-eez®️ Double Clip Connectors
The Mod-eez®️ system was developed to join panels securely together in a fast and simple method with no visibility of the connector. The Mod-eez®️ Double Clip Connector meets the objective by utilizing a 2 spring steel declining ramp “clips” and a 2 large collared Shoulder Screws at the two mating members. Spring steel makes the joint strong, yet flexible, while the collar on the Shoulder Screw adds tremendous resistance to torsional pull-out. Assembly occurs by simply sliding the Shoulder Screw heads down the clip ramps. With the clips located in their pockets, and the system assembled, all fasteners disappear.
Mod-eez®️ come in Single Clips, Double Clips, and Anti-Rotation Clips. The Mod-eez®️ Double Clip Connector is unique, in that it makes two points on contact in a single connector, thus cutting down on installation time. With two spring steel ramps, not only is this an anti-rotating connector, but it also comes in different combinations of clips. i.e. one non-locking (5033) and one locking (5034)
We have 3 types of clips available: non-locking (easy to disassemble), semi-locking (hard to disassemble), and locking (cannot be disassembled). Mod-eez®️ comes in two widths, working with both 5/8″ and 3/4″ + material.
Features and Benefits:
- Fast assembly
- Efficient and very good to use in production line manufacturing.
- Components are simply hooked together in seconds
- Reduces labor and equipment cost
- Efficient: High degree of pre-manufacturing.
- Components can be transported and simply assembled on site.
- Non-visible connector
- Appeals to the architect and customer
- Concealed
- Self-tightening
- The pass-thru, non-locking and semi-locking clips can be disassembled and reassembled
- Versatile
- For materials from 16 mm thickness and up.
- Used with all solid and wood-based materials and plastic as well as steel and aluminum.
- 4 types of clips: Pass-thru, non-locking, semi-locking, and locking.
- Durable and Strong
- Spring steel sturdy design
- Longer PH-screws (approx. 5 x 60), can significantly increase the strength of the connector.
Tips:
- Perfect for industrial manufacturing with CNC
- Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
- Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
- To prevent engaged members from rotating (without anti-rotation clips) attach the Shoulder Screw in the pocket and the clip on the surface.
- For handheld routers, use our Mod-eez®️ Drilling and Depth Jig for a perfect installation every time.
- Used with all wood and board materials
Applications:
- Case Goods
- Cabinets
- Chairs
- Furniture
- Interior design
- Shop fittings
Material
Spring steel
Coating
None
Mounting
With PH- or CS-screws Ø = 4,5 mm (length as required).
Advantages
Concealed, self-tightening connector for 32 mm system, demountable, for timber and steel.
Installation
Spindle moulder, plunge router, CNC equipment.
Suitable materials:
For all solid wood, wood-based panels and plastic materials from 16 mm thickness up.
Application
Case goods, shop fittings, furniture
Accessories
Drill- and depth-jig | Art.-No. CCD/5030D
Applications
-
- Cabinet Built with Mod-eez System
Videos
Installation
(View and Download Instruction Manual)
Steps:
- Route pocket for Mod-eez®️ Clip according to chart below
- Use the Mod-eez®️ Drilling and Depth Jig to pre-drill (5/32″ or 4 mm) holes 32 mm on center. This Jig will also ensure that the pocket is drilled to the perfect depth for all Mod-eez®️ single clip, double clip, and anti-rotation connectors.
- Mount clip with PH-Screws Ø = 4,5 mm (length as required)
- Pre-drill holes for Shoulder Screw and install
- Assemble workpiece with a rubber mallet
Tips:
- Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
- Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
- To prevent engaged members from rotating (without anti-rotation clips) attach the shoulder screw in the pocket and the clip on the surface.
Mod-eez®️ (for 3/4″ stock)
5033, 5034
Routing depth T
11 mm / 0.438″
Routing length L
≥ 75 mm / 2.934″
Routing width B
13,5 mm / 0.525″
Center distance Z
11 mm / 0.438″
Panel thickness
19 mm / 3/4″
Hole-line A
32 mm / 1-1/4″
You must be logged in to post a review.
Reviews
There are no reviews yet.