The tried and tested CHAMP biscuit is a #20 self-tightening, non-visible plastic slide-in connector and universally used for all types of materials for furniture, case goods, and architectural millwork. The two halves of the plastic connector are simply glued into the slot. Through the holes on the bottom part of the connector, the KNAPP Adhesive PU+ (Z011/1) can bond firmly to the material. After the curing, simply slide the parts together and tighten up the joint.
CHAMP – Biscuit Connector
$44.69 – $162.50
Description
CHAMP – Biscuit Connector
The tried and tested CHAMP biscuit is a #20 self-tightening, non-visible plastic slide-in connector and universally used for all types of materials for furniture, case goods, and architectural millwork. The two halves of the plastic connector are simply glued into the slot. Through the holes on the bottom part of the connector, the KNAPP Adhesive PU+ (Z011/1) can bond firmly to the material. After the curing, simply insert and then slide the parts together and tighten up the joint. A permanent connection can be made by gluing the joint. The CHAMP is utilized for standard cabinets as well as complicated parts such as miter joints where standard clamping aids cannot be used. Since the CHAMP connector is self-tightening, the pressure is applied directly within the joint and thus you will always achieve a tight and clean-glued joint.
Features and Benefits:
- Fast assembly
- Components simply slide together in seconds.
- Reduces labor and equipment cost
- Non-visible connector
- Appeals to the architect and customer
- Self-tightening
- no need to clamp the workpiece during assembly
- prevents forming of gaps in the joint over time
- Disassemble
- Can be assembled and disassembled
- Gluing aid
- Very popular to use as a gluing aid, especially useful for miter joints.
Tips:
- Used for knock-down furniture
- Used with all wood and board materials
- Recommended glue to install the connector biscuit and for the joint → KNAPP®-Adhesive PU+ (Z011/1)
Applications:
- Case Goods
- Architectural Millwork
- Shop-fitting
- Furniture
- Gluing aid
The CHAMP biscuit connector is the ideal answer for your furniture and architectural millwork needs. Our revolutionary plastic slide-in connector is discreetly positioned, reducing labor and equipment costs. Its self-tightening property guarantees flawless joints, eradicating any visible gaps.
This plastic biscuit connector is a valuable solution for tricky miter joints. Designed to work with a variety of wood and board materials, the CHAMP biscuit connector excels as the top pick among connectors on the market.
Plastic – PA6, fiber-glass reinforced, orange
None
Slide-in connector
Glue in with KNAPP-Adhesive PU+
Concealed, self-tightening, demountable connector
Cutting a slot with a biscuit joiner (#20 slot) and adjust the depth of the slot to 12.5 mm by using the micro-adjustment screw of the joiner. Add KNAPP-Adhesive PU+ and insert the connector using the insertion template
All wood and board materials
Furniture, architectural millwork, shopfitting, miter joints, and curves without using clamps or fixing devices
Videos
Installation
(View and Download Instruction Manual)
Steps:
- Make a #20 biscuit slot
- Add approx. 1/2″ bead of KNAPP®-Adhesive PU+ (Z011/1) in the middle and deepest point of the slot.
- Press the connector halves into the groove so that they mirror each other, using the fitting jig.
- Make sure that the connectors at the outer ends are flush with the surface of the component.
- After the glue is hardened enough, the parts can be joined together. To assemble the parts, first, insert and then slide them into each other.
- If desired, for final assembly, glue the joint before connecting the components.
Tips:
- Note: do not use too much adhesive
- Used for RTA furniture.
- The fitting jig ensures an optimum installation depth of the connector in the groove, regardless of how porous the panel material is.
You must be logged in to post a review.
You may also like…
-
SILVER – Biscuit Connector
$96.61 – $351.31 -
SUNNY – Biscuit Connector
$30.50 – $110.00 -
FAST – Biscuit Connector
$42.63 – $155.00 -
KNAPP®-Adhesive PU+
$14.09 – $299.37
Related products
-
Mod-eez®️ System Sets
$28.50 – $1,075.00 -
Out of stock
CHICO – Slide in Connector
$48.10 – $120.25
Reviews
There are no reviews yet.