METAL – Biscuit Connector
The METAL biscuit is a #20 self-tightening, non-visible zinc die-casting slide-in connector with integrated locking tabs and is suitable for load-bearing joints for panels and boards. The connector halves are inserted and screwed into the biscuit slot with 3×13 mm and 3×25 mm pan-head screws (PH screws). Simply slide the connector halves into each other to carry out the assembly. If needed, it can be reinforced by adding drops of KNAPP®-Adhesive PU+ (Z011/1) when installing the connector halves. The METAL biscuit connector is a very strong and immediately load-bearing, putting NO halt on the manufacturing process. If used for knock-down cabinets or furniture. The workpiece can be installed very fast on-site, thus allows the parts to be transported flat-packed. Optionally, the connector can be latched via locking tabs in one or both directions.
Features and Benefits:
- Fast assembly
- Components simply slide and join together in seconds.
- Reduces labor and equipment cost
- Non-visible connector
- Appeals to the architect and customer
- Self-tightening
- no need to clamp the workpiece during assembly
- prevents forming of gaps in the joint over time
- Solid
- Very strong connector and especially popular to use for furniture and cabinets made of hardwood.
Tips:
- Works great for knock-down furniture
- Especially useful for miter joints
- Joint can be latched via the locking tabs on the connector
- Used with all wood and board materials
- Recommended glue for a permanent joint → KNAPP®-Adhesive PU+ (Z011/1) or to install with the connector for reinforcement
Applications:
- Case Goods
- Architectural Millwork
- Shopfitting
- Furniture
Join the METAL biscuit connector revolution today for convenient and reliable solutions in your woodworking projects. Experience the ease of quick assembly in seconds without the need for clamping, making it perfect for constructing knock-down furniture and cabinets.
And don’t forget to infuse a dash of creativity with our wide selection of sizes, shapes, and patterns, allowing you to personalize your creations to suit your style and needs. Browse our selection of METAL biscuit connectors today to take your project to the next level.
Mounting
Screw-in with included PH-screws 3×13 mm (face grain), 3×25 mm (end grain)
Advantages
Concealed, self-tightening, demountable connector with optional integrated stop
Installation
Cutting a slot with a biscuit joiner #20 slot) and adjust the depth of the slot to 12.5 mm by using the micro-adjustment screw. Insert the connector into the pre-cut slot and screw it in.
Suitable materials
All wood and board materials
Application
Furniture, architectural millwork, shopfitting, door frames
