The FAST Biscuit Connector Sample Pack contains 10 pairs. FAST is a #20 self-tightening, non-visible plastic snap-in connector and can be used in all wood materials. The two connector pieces are simply knocked into the biscuit cut with a hammer.
FAST Biscuit Connector – Sample Pack
$10.00
For bulk orders, please reach out to us for tailored lead times and shipping options.
Description
FAST Biscuit Connector – Sample Pack
The FAST biscuit is a #20 self-tightening, non-visible plastic snap-in connector and can be used in all wood materials. The two connector pieces are simply knocked into the biscuit cut with a hammer. The patented cutting edges hold the connector in the slot with no glue required. Simply snap-in the male into the female part to carry out the assembly. If needed, it can be reinforced by adding drops of KNAPP®-Adhesive PU+ (Z011/1) when installing the connector pieces. Make sure that you insert the connector parts mirrored into the components. This connection is immediately load-bearing, putting NO halt on the manufacturing process. The FAST connector is suitable for all types of snap-in connections, especially where design or space conditions do not allow the usual sliding connection, or for very simple self-assembly by the end-user. Add KNAPP®-Adhesive PU+ (Z011/1) to the joint before the final assembly for a permanent joint.
Features and Benefits:
- Fast assembly
- Components simply snap-in and join together in a second.
- Reduces labor and equipment cost
- Non-visible connector
- Appeals to the architect and customer
- Self-tightening
- no need to clamp the workpiece during assembly
- snaps straight in and is used where design or space conditions do not allow the usual sliding connection
- Gluing aid
- Very popular to use as a gluing aid
Tips:
- Works great for RTA furniture.
- Used with all wood and board materials
- Recommended glue for a permanent joint → KNAPP®-Adhesive PU+ (Z011/1) or to install with the connector for reinforcement
Applications:
- Case Goods
- Architectural Millwork
- Shop-fitting
- Furniture
- Gluing aid
- Moldings and trim
- Face frames
- False fronts
Material
Plastic – PA6, grey
Coating
none
Connector type
Clip-in connector
Mounting
Knock-in following the radius of the cutting edges, permanent gluing optional using KNAPP-Adhesive PU+
Advantages
Concealed, self-tightening, demountable connector
Installation
Cutting a slot with a biscuit joiner (#20 slot) and adjust the depth of the slot to 12.5 mm by using the micro-adjustment screw. Insert each of the different connector halves into the pre-cut slots.
Suitable materials
All softwoods and board materials without laminated surfaces
Application
Furniture, architectural millwork, face frames, shopfitting, blinds, coverings, removable panels
Applications
Videos
Installation
(View and Download Instruction Manual)
Steps:
- Make biscuit slot with biscuit joiner or CNC
- Place the connector tip at one end of the slot at an angle approximately equal to the radius of the cut.
- Press in the direction of the groove and make sure that the connector halves are inserted mirrored to each other.
- Use a hammer to knock in the FAST and slide along the radius of the slot. Thus, the cutting edges intersect with the component.
- Make sure that the connectors at the outer ends are flush with the surface of the component.
- To assemble the parts, simply snap the parts into each other
Tips:
- Popular to use as a gluing aid.
You must be logged in to post a review.
Reviews
There are no reviews yet.