The ZIPBOLT™ Sample Pack contains 3 pieces:
1 x ZIPBOLT™ 100 Mini
1 x ZIPBOLT™ 90 KD
1 x ZIPBOLT™ 85
The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, and frame connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors and fasteners. ZIPBOLT™️ requires no additional tightening while the parts are connected. Tensioning tools often cause damage and a considerable amount of extra work – this is not necessary when using the ZIPBOLT™️. The fastener connects and holds the components in position; easy disassembly is possible at any time.
The connector consists of a threaded rod, which has a metric fine thread and ensures an optimal force transmission – combined with a force-transmitting gear drive. The mounting of the connector is very fast; it is easy to install with a cordless drill or even a hand-held screwdriver. With these tools, the processor can quickly tighten the components together. One-hand mounting is also possible. Countertops and frames from 5/8″ (16 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds.
The different variations ZIPBOLT™️ 85, 100 Mini, 120, 170 and 90 KD are specifically tailored for different dimensions and requirements in the components.
ZIPBOLT™️ 100 MINI – Components can be tightened by simply using a #4 mm or 5/32″ hex key.
ZIPBOLT™️ 85, 120, 170 – Components can be tightened simply by using a #5 mm or 3/16″ hex key.
Into pre-drilled holes and grooves
Fast and easily installed by only using a 5 mm Allen key or 5 mm hex bit in conjunction with a cordless drill
Drilling machine, plunge router, CNC equipment
Solid wood, wood panels, composite materials from 16 mm to 22 mm thickness up
Connector for worktops/countertops and panels
Beds and Countertops
ZIPBOLT™️ 100 mini – Joint connector for countertop from 5/8″ (16 mm) with metal housing
The ZIPBOLT™️ 100 MINI is our thinnest version and should be drilled 13 mm deep with a 25 mm diameter drill. It can be used from a board thickness of 16 mm to 20 mm. The breaking loads of the metal housing are also 100 kg and the breaking load in pulling direction is as well up to 60 kg.
The ZIPBOLT™️100 MINI can be tightened simply using a #4 mm or 5/32″ Hex Key.
ZIPBOLT™️ 90 KD – Frame connector for frames from 7/8″ with metal housing
The ZIPBOLT™️ 90 KD connector consists of a threaded rod, which has a metric fine thread and ensures an optimal force transmitting gear drive. This connector also consists of a Rampa insert with external coarse threads for inserting into wood and metric internal threads to receive the threaded rod. The mounting of the connector is very fast and easy to install with a cordless drill or even a hand-held screwdriver. Frames from 7/8″ (22 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds.
The ZIPBOLT™ 90 KD can be tightened simply using a #5 mm Hex Key.
ZIPBOLT™️ 85 – Joint connector for countertop from 7/8″ (22 mm) with metal housing The ZIPBOLT™️ 85, 120 and 170 have been designed for use in countertops. The connector is 9.5 mm high and should be drilled 20 mm deep with a 35 mm diameter drilled hole. This makes it suitable for countertop thickness of 25 mm to 40 mm. The breaking load of the metal housing is about 100 kg and the breaking load in pulling direction is up to 60 kg. The ZIPBOLT™️ 85 can be tightened simply using a #5 mm or 3/16″ Hex Key.